- Reduced price
- New
SAE AMS5517
$78.00
$35.10
Save 55%
SAE AMS5517 Revision M, April 1, 2018
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (301) Cold Rolled,
125 ksi (862 MPa) Tensile Strength
Description / Abstract:
Form
This specification covers a corrosion-resistant steel in the form of sheet and strip 0.005 inch (0.13 mm) and over in nominal thickness (see 8.6).
Application
These products have been used typically for parts requiring moderate drawing or forming, but usage is not limited to such applications.
Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
This specification covers a corrosion-resistant steel in the form of sheet and strip 0.005 inch (0.13 mm) and over in nominal thickness (see 8.6).
Application
These products have been used typically for parts requiring moderate drawing or forming, but usage is not limited to such applications.
Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
SAE AMS5517 Revision M, April 1, 2018
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (301) Cold Rolled,
125 ksi (862 MPa) Tensile Strength